JS1000 concrete mixer belt loading pneumatic door opening and hopper loading hydraulic door opening

JS1000 concrete mixer is a common mixing equipment widely used in engineering and construction fields. The loading methods of JS1000 concrete mixer include hopper loading and belt loading, and the door opening methods include pneumatic opening and hydraulic opening. The following is a detailed introduction to these two configurations.

1. JS1000 concrete mixer belt loading pneumatic door opening

The belt-loading JS1000 concrete mixer transports aggregate, cement, sand and other raw materials into the mixing drum of the mixer through the belt drive system. This feeding method is simple to operate, highly efficient, can meet production needs, and can be carried out according to customer needs. Adjustment and control.

The discharge port is designed with a pneumatic door opening device, and the opening and closing of the door is controlled by a pneumatic actuator. When the concrete mixing is completed, the control system operates the pneumatic device to quickly and automatically open the discharge door, thereby facilitating the unloading and transportation of concrete.

The JS1000 concrete mixer with belt loading and pneumatic door opening can improve production efficiency, simplify operating procedures, and is stable and reliable. It is widely used in concrete mixing stations, construction sites, engineering construction sites and other fields. These features make the JS1000 concrete mixer one of the commonly used mixing equipment in the concrete industry.

2. JS1000 concrete mixer hopper loading hydraulic door opening

The JS1000 concrete mixer with hopper loading places the concrete raw materials (cement, aggregate, sand, water, etc.) on the material pile according to the proportion requirements to ensure that the proportion of various raw materials is accurate to ensure the quality of the concrete. Start the motor of the concrete mixer, open the hopper loading door of the concrete mixer, and put in the prepared concrete raw materials one by one. After all the raw materials are put into the hopper, close the loading door of the material door and wait for the concrete mixer to complete the mixing process.

The hydraulic door opening system is reasonably designed and easy to operate. The operator can easily control the loading process of the hopper. The door opening speed is adjustable and can be adjusted according to different concrete proportions and production needs to ensure the quality of concrete and production efficiency. But there are some precautions when using it:

When operating the hydraulic door opening system, the operator needs to pay attention to the operating procedures to ensure correct and stable operation;

Regularly check the working status of the hydraulic system, and promptly discover and solve hydraulic system faults;

The equipment should be kept clean during use to prevent debris from entering the hydraulic system and affecting normal work.

The hopper loading hydraulic door opening system of the JS1000 concrete mixer is an important part of its high degree of automation, which effectively improves production efficiency and reduces the complexity of manual operations. It is one of the common technical features of modern concrete mixing equipment.

To sum up, both the JS1000 concrete mixer with pneumatic door opening for belt loading and hydraulic door opening for hopper loading has its own advantages, and the specific configuration needs to be determined according to the actual needs of the customer. If you are interested in concrete mixer, welcome to contact us!